over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1968 - 1972 CHEVELLE GTO CUTLASS SKYLARK DRIVE SHAFT. THIS DRIVE SHAFT MEASURES 48 12 INCHES FROM CENTER TO CENTER U-JOINTS. THANK YOU.
over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1968 - 1972 CHEVELLE GTO CUTLASS SKYLARK BUCKET SEATS PAIR AND BACK SEAT TOP AND BOTTOM. THE SEAT SPRINGS APPEAR TO BE IN GOOD CONDITION AND THE HEAD RESTS DO NOT HAVE ANY CRACKS IN THEM. THANK YOU.
over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1968 - 1972 CHEVELLE GTO CUTLASS SKYLARK DRIVE SHAFT. THIS DRIVE SHAFT MEASURES 53 34 INCHES FROM CENTER TO CENTER OF THE U-JOINT CAP. SOMEBODY AT ONE TIME HAS SPOTWELDED THE U-JOINT CAP ONTO THE DRIVE SHAFT WHICH THE SPOTWELDS CAN BE GROUND OFF AND THEN THE DRIVE SHAFT CAN BE USED. THE DRIVE SHAFT INCLUDED THE YOKE FOR A TURBO 350 AND MUNCIE TRANSMISSION. THANK YOU.
over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1968 - 1972 CHEVELLE GTO CUTLASS SKYLARK DRIVE SHAFT. THIS DRIVE SHAFT MEASURES 55 INCHES FROM CENTER TO CENTER U-JOINT CAP OF DRIVE SHAFT, AS SHOWN IN THE PICTURES. THIS DRIVE SHAFT INCLUDES THE YOKE FOR A TURBO 350 MUNCIE M20 M21. THANK YOU.
over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1968 - 1972 CHEVELLE GTO CUTLASS SKYLARK 10-BOLT REAR END SINGLE TRACK. THE REAREND HAS A 308 GEAR RATIO. I DO NOT HAVE THE BRAKE MECHANISMS AND THE BRAKE DRUMS. THANK YOU.
over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1969 1970 CHEVELLE SS, 1969 CAMARO SS, 1969 1970 NOVA SS 14 X 7 WHEELS. THIS LISTING IS $400.00 FOR BOTH WHEELS. THESE WHEELS HAVE BEEN SANDBLASTED, PRIMERED, AND PAINTED. THESE WHEELS ARE STRAIGHT AND TRUE. ALL BOLT HOLES ARE IN GOOD CONDITION. THANK YOU.
over a month agoKansas City, KS+14 milesAuto Parts for Sale
FOR SALE 1971 1972 CHEVELLE SS, 1970-1981 CAMARO Z28 5-SPOKE FACTORY 15 X 7 RALLY WHEELS SET OF 4. THESE WHEELS HAVE BEEN SANDBLASTED, PRIMERED, AND PAINTED. THEY ARE STRAIGHT AND TRUE. ALL BOLT HOLES ARE IN GOOD CONDITION. THE BEAUTY RINGS ARE FACTORY ORIGINAL AND HAVE YEARS OF MINOR SCUFF MARKS AND LIGHT SCRATCHES. THE CENTER CAPS ARE NEW REPRODUCTION. THANK YOU.
over a month agoKansas City, MO+11 milesCars for Sale
I am listing this for a friend. He is older and is not going to restore all of his projects, so offered this one for sale. It is a 1965 Chevelle, been sitting for many years. Was a 6 cyl. car, but will come with a big block 396 block, heads, pistons, and disassembled motor parts. Also will come with an SS title if you wish. It is kind of dark in the the shop that it is stored in and these are t...
Item must be returned within: 14 Days Refund will be given as: Money Back Return shipping will be paid by: Buyer Restocking Fee: No Returns Accepted: Returns Accepted Return policy details: Part Brand: GM Manufacturer Part Number: 5953008 Interchange Part Number: Malibu, Chevelle, Laguna Placement on Vehicle: Array 1974 Chevy Malibu, Chevelle, Laguna 1- OEM Passenger Side / Right/ RH Tail Light...
Original GM #3963512 Corvette Chevelle ElCamino 454 Engine Block. This is the high performance 4-Bolt Main Block used in RARE LS6 425HP High Performance Corvettes, Chevelles & El Caminos. Fresh machine work including rough bore to .027---will finish hone to .030, Line Bored, Magnufluxed & deck just enough for a clean pad. Dated E-14-71 (May 14, 1971)--for mid to late production 71. Ready for br...
$20,000

1970 Chevelle

over a month agoKansas City, MO+11 milesVehicles For Sale
350 V-8 5.7L Engine refurbished like new with a Z-28 CAM, beautiful chevy valve covers, Edelbrock intake manifold, K&N air filter, brushed aluminum water pump, harmonic balancer, chrome power steering pump, chrome alternator, all chrome pulleys, all belts, fan clutch, fan shroud, platinum spark plugs, spark plug wires, thermostat housing, Hedman Elite Hedders, starter, cross-flow radiator, all ...
Similar
Wanted to Buy Needing a pair of GM 3904392 Aluminum Cylinder HeadsThese were on some 1967 L88L89s Corvettes and sold over the counter for several yearsRestoring a 67 car and decided to upgrade to factory aluminumContact Jon at the Reply button on topKeywords BBC, Aluminum Heads, 427, 396, 454, Super Sport, Corvette, Chevelle, Nova, Camaro, L88, L89, LS6
over a month agoMission, KS+17 milesAuto Parts for Sale
Up for sale is a set of 4 14 x 7" Tires and Wheels for a 1969-70 Chevelle. All wheels are stamped "YA". Tires have a a lot of tread left. Tire size is 205/75/14 Trim rings/caps are not perfect. All bolt holes in wheels are good and all wheels are straight. I will NOT ship these Local pick up only.
over a month agoKansas City, MO+11 milesAuto Parts for Sale
I have this original condition set of Chevy Chevelle super sport hub caps. They are in very good condition for their age. I only cleaned up one for the picture, the rest will need a good cleaning.
over a month agoKansas City, MO+11 milesAuto Parts for Sale
572 Ci BBC Sleeper Engine, wanted it to look stock and it pretty much does.Bowtie tall deck block w billet mains, Has a Callies 4.3750 Crank, Oliver Rods, 4.560 bore diamond pistons, stock ZZ572R solid roller camshaft, Isky red zone lifters, low profile Jessel shaft rockers, $758 Manley NexTec valve springs, Titanium retainers w bead lock keepers, New factory ATI balancer, GM Performance valve ...
over a month agoKansas City, MO+11 milesAuto Parts for Sale
396 Chevelle Camaro blocks $250 up454 4 bolt short blocks $1950502 New short blocks $4850540 New short blocks $55001050 Dominator $850454 bare blocks $250BBC Blower intake trade for a SBC 4-71 intake20 boxes or so of forged pistons
Original GM Aluminum Closed Chamber Square Port heads. GM #3919842. These are correct for late 67, 68 and early 69-396/427's including L88's/L89's. Original GM heads--1 is dated 12/67---has small repair of water port near casting number under the valve cover (cannot be seen). This was a very minor crack and has been pressure tested. The other head is dated 11/69. These heads were ran until rece...
Original GM #3916321 Corvette 427 Engine Block. This is the high performance 4-Bolt Main Block used in RPO L71 435HP TriPower applications in Corvettes. Also used in 425HP L72 COPO Chevelles, Camaros & Passenger Cars. Fresh machine work including rough bore to .037---will finish hone to .040, Line Bored, Magnufluxed & deck just enough for a clean pad. Dated F167 (June 16, 1967)--for early to mi...
Original GM #3869942 Corvette 427 Engine Block. This is the high performance 4-Bolt Main Block used in RPO L72 425HP applications in Corvettes, Chevelles & Passenger Cars. Fresh machine work including rough bore to .027---will finish hone to .030, Line Bored, Magnufluxed & deck just enough for a clean pad. Dated E36 (May 3, 1966)--for late production 66. Ready for broaching & stamping. Block is...
Returns Accepted: ReturnsNotAccepted Part Brand: GM "A" Body Manufacturer Part Number: Factory Tilt Floor Shift Steering Column Interchange Part Number: Chevelle "SS", LeMans, GTO, Gran Prix, Skylark, GS Other Part Number: Cutlass, 442, Monte Carlo, ElCamino, Malibu, Etc. 1- 1969-72 GM 'A" Body FACTORY Tilt Floor Shift Steering Column-!!! OEM Tilt Column will fit any 1969, 1970, 1971, 1972--- +...
12